Show Ip Lisp Data-Cache - Cisco Nexus 7000 Series Command Reference Manual

show ip lisp data-cache

S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m .
show ip lisp data-cache
To display the LISP IPv4 EID-to-RLOC data-cache mapping on an ITR, use the show ip lisp data-cache
command.
Syntax Description destination-EID]
None
Defaults
Any command mode
Command Modes
network-admin
Supported User Roles
network-operator
vdc-admin
vdc-operator
Command History Release
5.0(1.13)
Use the show ip lisp data-cache command on LISP ITR devices to display the LISP IPv4 EID-to-RLOC
Usage Guidelines
data-cache mappings. Data-cache mappings are built when a Map-Request is sent and are maintained
until a valid (matching nonce) Map-Reply is received. The data-cache entry is then moved to the
map-cache.
This command does not require a license.
This example shows how to display the LISP IPv4 EID-to-RLOC data-cache mapping on an ITR:
Examples
switch# show ip lisp data-cache
LISP IP Mapping Data Cache for Context "default", 0 entries, hwm: 4
Complete entries removed after 15-second period: 0
Incomplete entries removed after 1-minute period: 0
switch#
Related Commands Command
ip lisp map-cache
Cisco Nexus 7000 Series NX-OS LISP Command Reference
LSP-160
show ip lisp data-cache [destination-EID]
(Optional) Destination EID to display mapping for.
Modification
This command was introduced.
Description
Displays the current dynamic and static IPv4 EID-to-RLOC map-cache
entries.
Cisco Nexus 7000 Series LISP Commands