Mounting The Racks - Siemens SIMATIC ET 200pro Original Instructions Manual

Installation

4.2 Mounting the racks

Maximum size
The width of an ET 200pro is limited mechanically and electrically.
Table 4- 1
Features
Number of mod-
ules
Width
Number of invert-
ers
Table 4- 2
ET 200pro features
Load capacity of the electronics supply 1L+
Load capacity of the load voltage supply 2L+
Current carrying capacity of the power supply
4.2 Mounting the racks
The frequency converter is mounted on the wide rack. The following versions are possible:
● Rack, wide
● Rack, compact-wide
30
Mechanical limits
Rule
≤ 16
≤ 1 m (without rack)
≤ 5
Electrical limits
Inverter features
Power consumption at 1L+
Power consumption at 2L+
Power consumption at the
power supply
Rule
≤ 5 A
≤ 0.8 A per inverter
≤ 10 A
The load caused by the frequency inverter
is negligible.
≤ 25 A
The inverter's power consumption depends
on the connected motor.
SIMATIC ET 200pro FC-2 converter
Operating Instructions, 04/2015, FW V4.7.3, A5E34257324B AB