Definition Of Emc Environment And Emc Classes - Siemens SIMATIC ET 200pro Original Instructions Manual

Description of technical design
A description of the unit's technical design covering its EMC properties may be drawn up.
Such a description must be approved by a "competent body" appointed by the responsible
European authority. This method enables the use of standards which are still being
prepared.
EMC standards
The drives were tested according to the EMC product standard EN 61800-3:2004.
12.5.2

Definition of EMC environment and EMC classes

Classification of EMC behavior
The EMC environment and the EMC classes are defined in the EMC product standard
EN 61800-3 as follows:
Environment 1
An environment in which there are residential estates and facilities which are connected
directly to a public low-voltage supply network without the use of an intermediate
transformer.
Note
Example: Houses, apartments, commercial units or office rooms within a residential building.
Environment 2
An environment in which there are commercial estates and facilities which are not connected
directly to a public low-voltage supply network.
Note
Example: Developed commercial sites and other sites which are supplied by a transformer
provided specially for the purpose.
Class C1
Power drive system (PDS) with a rated voltage of less than 1000 V for use in residential
buildings.
SIMATIC ET 200pro FC-2 converter
Operating Instructions, 04/2015, FW V4.7.3, A5E34257324B AB
12.5 Electromagnetic compatibility of the converters
Technical data
223