Siemens SIMATIC ET 200pro Original Instructions Manual page 191
Distributed i/o system low voltage converter
Hide thumbs
Also See for SIMATIC ET 200pro:
- Operating instructions manual (545 pages) ,
- Quick manual (260 pages) ,
- Operating instruction (146 pages)
Table of Contents
Advertisement
You leave the memory card in place:
11. Tighten all fixing screws.
12. Switch on the 24 V converter supply volt-
13. If the firmware upgrade was successful,
14. Reconnect all connectors.
SIMATIC ET 200pro FC-2 converter
Operating Instructions, 04/2015, FW V4.7.3, A5E34257324B AB
age.
the converter LED RDY turns green after
several seconds.
10.3 Firmware upgrade and downgrade
You remove the memory card
11. Disassemble the converter and remove it
from the ET 200pro station.
12. Remove the card with the firmware from
the converter.
13. Plug the converter into the ET 200pro
station and tighten all fixing screws.
14. Switch on the 24 V converter supply volt-
age.
15. If the firmware upgrade was successful,
the converter LED RDY turns green after
several seconds.
Repair
191
Advertisement
Table of Contents
