Machine Documentation; A.5.2 Machine Documentation - Siemens SIMATIC ET 200pro Original Instructions Manual

4.
You have performed the acceptance test of the STO function.
A.5.2

Machine documentation

Machine or plant description
Designation
Type
Serial number
Manufacturer
End customer
Block diagram of the machine and/or plant:
...
Inverter data
Table A- 5 Hardware version of the safety-related inverter
Labeling the drive
...
...
SIMATIC ET 200pro FC-2 converter
Operating Instructions, 04/2015, FW V4.7.3, A5E34257324B AB
The inverter signals neither faults nor alarms of the safety
•
functions (r0945[0...7], r2122[0...7]).
The inverter signals the following:
•
"STO is selected" (r9773.0 = 1).
"STO is active" (r9773.1 = 1).
Deselect STO
4.1. Deselect STO.
4.2. Check the following:
STO is not active (r9773.1 = 0).
•
The inverter signals neither faults nor alarms of the safety
•
functions (r0945[0...7], r2122[0...7]).
...
...
...
...
...
...
...
Article number and hardware version of the inverter
...
...
A.5 Acceptance tests for the safety functions
...
...
Appendix
Status
...
...
245