Siemens SIMATIC ET 200pro Original Instructions Manual page 60
Distributed i/o system low voltage converter
Hide thumbs
Also See for SIMATIC ET 200pro:
- Operating instructions manual (545 pages) ,
- Quick manual (260 pages) ,
- Operating instruction (146 pages)
Table of Contents
Advertisement
Configure the hardware
5.3 Configure the hardware in SIMATIC Manager
Configure the ET 200pro
Procedure
To configure the ET 200pro, proceed as follows:
1. Select the interface module in the hardware catalog.
2. Drag and drop the interface module into the PROFINET IO system.
You have configured the ET 200pro.
Assign device name
The IO controller accesses its IO device via the device name. The IP address is assigned
permanently to the device name.
60
SIMATIC ET 200pro FC-2 converter
Operating Instructions, 04/2015, FW V4.7.3, A5E34257324B AB
Advertisement
Table of Contents
