Siemens SIMATIC ET 200pro Original Instructions Manual page 201

Channel-related data
From the PROFIBUS standard
0002
hex
0003
hex
0005
hex
0009
hex
When several faults are allocated at one inverter with the same message class, then only one mes-
sage is displayed.
SIMATIC ET 200pro FC-2 converter
Operating Instructions, 04/2015, FW V4.7.3, A5E34257324B AB
Undervoltage
Overvoltage
Overtemperature
Error
Alarms, faults and system messages
11.2 Diagnostics through fieldbus
From ET 200pro GSD
0010 Hardware/software error
hex
0013 Communication error
hex
0014 Ground fault
hex
0018 Actuator disconnection
hex
0019 Safety-related shutdown
hex
001A External fault
hex
001D Fault 1 in actuator/sensor
hex
001F Channel temporarily not available
hex
201