Checking The Operation Panel Keys - Kyocera TASKalfa 4500i Service Manual

Item No.
U206 Setting: [Price]
1. Select the item to be set.
B/W
Initial setting: Off
2. Select the paper size to be set.
3. Change the setting value using the +/- keys.
Display
A3-Ledger
B4
Card
Other
In 10-yen increments
Value of 0 allows non-restricted copying. (At a periodic maintenance, etc.)
4. Press the start key. The value is set.
5. Turn the main power switch off and on. Allow more than 5 seconds between Off and On.
U207

Checking the operation panel keys

Description
Checks operation of the operation panel keys.
Purpose
To check operation of all the keys and LEDs on the operation panel.
Method
1. Press the start key. The screen for executing is displayed.
2. [Count0] is displayed and the left most LED on the operation panel lights.
3. As the keys lined up in the same line as the lit indicator are pressed in the order from the top
to the bottom, the figure shown on the touch panel increases in increments of 1. When all the
keys in that line are pressed and if there are any LEDs corresponding to the keys in the line
on the immediate right, the top LED in that line will light.
4. When all the keys on the operation panel have been pressed, all the LEDs light for up to 10
seconds.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Display
Black & White
A3/Ledger size
B4 size
Post card
Other
Description
Description
Description
1-3-97
2LL/2LJ/2LH
Setting Initial
range setting
0 to 300 10
0 to 300 10
0 to 300 10
0 to 300 10