Setting Dp Reading Position Modification Operation - Kyocera TASKalfa 4500i Service Manual

Hide thumbs Also See for TASKalfa 4500i:

Table of Contents

Setting DP reading position modification operation

The presence or absence of dust is determined by comparing the scan data of the original trailing

edge and that taken after the original is conveyed past the DP original scanning position. If dust

is identified, the DP original scanning position is adjusted for the following originals.

Using image correction to reduce black streaks.

When using DP, to solve the problem when black lines occurs due to the dust with respect to

original reading position.

The coordinates of position where documents are scanned are modified when [System Menu]

[Adjustment/Maintenance] [Correcting Black Line] is set to [Off].

1. Press the start key.

2. Select the item to be set.

Setting: [CCD]

1. Select the item to be set.

2. Change the value using the +/- or numeric keys.

3. Press the start key. The value is set.

Method: [Black Line]

1. Select [Clear].

2. Press the start key. The setting is cleared.

Press the stop key. The screen for selecting a maintenance item No. is displayed.

Setting of standard data when dust is detected.

Initialization of original reading position.

Lowest density of the R regard as the dust

Lowest density of the G regard as the dust

Lowest density of the B regard as the dust

Show Quick Links

Table of Contents

Taskalfa 3500i Taskalfa 5500i