Checking The Operation Of The Fan Motors - Kyocera TASKalfa 4500i Service Manual

Item No.
U037

Checking the operation of the fan motors

Description
Drives each fan motor.
Purpose
To check the operation of each fan motor.
Method
1. Press the start key.
2. Select the fan motor to be operated.
3. Press the start key. The operation starts.
Display
Fuser Cooling
LSU Cooling
Exit Cooling
Toner
Low Volt
Exit Rear Cooling Eject rear fan motor (EFRM) is turned on
IH PWB
IH Coil
DLP Front
Container Cooling Exhaust motor 1and 2 (EXFM1, 2) is turned on
GroupA
GroupB
4. To stop operation, press the stop key.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Description
Fuser rear fan motor (FURFM) is turned on
LSU fan motor (LSUFM) is turned on
Eject front fan motor (EFFM) is turned on
Toner fan motor (TFM) is turned on
Power source fan motor (PSFM) is turned on
Heater fan motor (HFM) is turned on
Fuser front fan motor (FUFFM) is turned on
Developer fan motor 1and 2 (DEVFM1, 2) is turned on
Fan motors of group A are turned on
Fan motors of group B are turned on
1-3-37
Description
2LL/2LJ/2LH
Group
B
B
B
A
A
B
A
A
A
A