Kyocera TASKalfa 4500i Service Manual page 427

6. Pull out the drum unit.
7. Check or replace the drum unit and refit
all the removed parts.
8. When replacing the new drum unit, pro-
ceed as follows:
1) Performs maintenance mode U119
(drum setup) (see page 1-3-73).
2) Performs maintenance mode U140
(AC calibration) for 55 ppm model
only (see page 1-3-80).
3)Performs maintenance mode U464
(Calibration) (see page 1-3-154).
4)Performs maintenance mode U412
(Adjusting the uneven density) (see
page 1-3-146).
5)Performs maintenance mode U464
(Calibration) (see page 1-3-154).
6)Performs maintenance mode U410
(Adjusting the halftone automatically)
(see page 1-3-138).
Figure 1-5-52
1-5-30
2LL/2LJ/2LH-1
Drum unit