Kyocera TASKalfa 4500i Service Manual page 87

15. Fit the ferrite core to signal cable of coin
vender.
16. Fit the clamp to signal cable of coin
vender.
17. Remove a screw from the coin vender
and fix the coin vender with a clamp.
18. Affix the price size decal at the right
side of the coin vender operation panel.
19. Turn the main power switch on and
enter the maintenance mode.
20. Run maintenance mode U206 and acti-
vate 'Coin vender is installed.' Continue
configuring the coin vender required
(see page 1-3-96).
21. Exit the maintenance mode.
Figure 1-2-83
Figure 1-2-84
1-2-63
2LL/2LJ/2LH
Coin vender
Clamp
Screw
Ferrite core
Signal cable
of coin vender
Signal cable of
coin vender
Price size seal