Calling By Entering An Address Directly - Panasonic KX-VC300 User Manual

Starting a Video Conference

Calling by Entering an Address Directly

You can make a video conference call by entering the IP address, SIP URI (or SIP user name), or MCU's
conference room number@IP address.
1 Press [Menu].
•
The Menu screen is displayed.
2
Select "Manual Dial" using [
[Enter].
•
The input screen is displayed.
3
Select "Multi-Point" using [
Note
•
If you are using the KX-VC300, you can select
"Multi-Point" after purchasing an activation key
card (KX-VCS301) to activate multiple-party
video conference calls (Page 105). For details
about the activation key, contact your dealer.
4
Select one of the following values using [
2-party video conference call: "No"
3-party video conference call: "2 sites"
4-party video conference call: "3 sites"
Note
•
When connecting to an MCU or non-Panasonic
video conference system, you cannot make
3-party/4-party video conference calls.
5
Select "Site 1", "Site 2", "Site 3" using [
40 User Manual
][ ] and press
][ ].
][ ].
][ ].
1
7
2-5
6
8