Alert Notification; External Device Control; Dual Lane Operation - Panasonic WX-CT420 Operating Instructions Manual

Operating procedures

Alert notification

When the Center Module is WX-CC411 or WX-CC412, store
personnel wearing this product can send a security alert to
the Center Module.
Hold down the [F] button for 2 seconds or
more.
A beep is heard from the speaker of the headset,
indicating that the transmission is complete, and a
security alert is sent to the Center Module.
When the Center Module receives a security
alert from this product, it is possible to
perform a preset operation (TALK & PAGE
Recording, Send E-Mail, alert message
playback, Camera Monitoring, etc.).

External device control

When the Center Module is WX-C3010, you can control the
external device control terminal of the Center Module using
this product.
Hold down the [F] button.
A short beep is heard from the speaker of the
headset and the external device control terminal of
the Center Module enters the ON state.
Release the [F] button.
2 short beeps are heard from the speaker of the
headset and the external device control terminal of
the Center Module enters the OFF state.
14

Dual lane operation

In dual lane operation, this product must select a lane for
communication.
For Normal setup
Switching to Lane B
When a connection is made to Lane A, the lane indicator is
lit in orange.
Press the [T2] button.
A voice of "Lane B" is heard from the speaker of the
headset and the lane indicator is lit in green. The
connection is changed to Lane B.
Switching to Lane A
When a connection is made to Lane B, the lane indicator is
lit in green.
Press the [T2] button.
A voice of "Lane A" is heard from the speaker of the
headset and the lane indicator is lit in orange. The
connection is changed to Lane A.
For Direct Lane Select setup
Switching to Lane B
When a connection is made to Lane A, the lane indicator is
lit in orange.
Press the [T2] button.
A voice of "Lane B" is heard from the speaker of the
headset and the lane indicator blinks green. The
connection is changed to Lane B. You can talk with a
customer at the menu board of Lane B.
Switching to Lane A
When a connection is made to Lane B, the lane indicator is
lit in green.
Press the [T1] button.
A voice of "Lane A" is heard from the speaker of the
headset and the lane indicator blinks orange. The
connection is changed to Lane A. You can talk with a
customer at the menu board of Lane A.