Detailed Hardware Description; Apollo Block Diagram - Eurotech Apollo User Manual

APOLLO user manual

Detailed hardware description

This section provides a detailed description of the functions provided by the APOLLO.
This information may be required during development, once you have started adding
extra peripherals or are starting to use some of the embedded features.

APOLLO block diagram

The diagram below illustrates the functional organization of the APOLLO:
VGA
LVDS
Option Board
IDE Devices
USB
AC '97 2.2
CODEC
FWH BIOS
IEE802.3
10/100 NIC
Front Panel
Connector
FAN Control
Temperature
Sensing
90
Intel Pentium M
400MHz
Processor Side Bus
82855GME
Graphics and
Memory Controller
Hub
PCI Bus
82801DB
I/O Controller Hub
Dual IEEE1394
(ICH4)
LPC
Bus
LPC Super I/O
TPM (Optional)
SMBus
Hardware Monitor
Power Supplies
Clock Generator
Unbuffered
DDR SDRAM
DIMM Socket
ECC or Non ECC
IEEE802.3
PCI Slot
10/100 NIC
PCI Dual
CardBus UART
Keyboard, Mouse, Floppy
Drive Controller, Parallel
Port, 2 UARTs and
Infrared Port
TCPA Security Device
Voltage
Monitoring
Issue G