Eurotech Apollo User Manual page 85

Field
Power Button
Function
Suspend Mode
Power-on by
keyboard
After Power Failure
Issue G
Explanation
Choose the function that the computer's power button is to have,
as follows:
• Power Off
. Pressing the power button toggles the system
between power on and power off.
• Sleep
. Pressing the power button toggles the system between
sleep (power saving) mode and wake mode.
These power management settings are useful if no APM/ACPI OS
is present, for example under DOS. In an ACPI OS (such as
Windows XP and some versions of Linux) your selection here has
no effect and this behaviour must be configured from the OS
itself.
For your selection here to have an effect, the Power
Savings must be set to an option other than Disabled.
Choose the type of suspend mode. You can choose:
• Save To Disk
. The system will save its state to disk and
power off.
• Suspend
. The system will save its state but remain in a low
power mode.
Specify whether the power button on the keyboard is to be
Enabled or Disabled.
Choose what you want to happen if AC power fails. You can
choose:
• Stay Off
to leave the power turned off until the power button is
pressed.
• Last State
to return the system to the power state it was in
before the failure.
• Power On
to restart the computer automatically when power
is restored.
To allow the APOLLO board to boot automatically when
AC power is applied, the Power On setting should be
selected.
PhoenixBIOS features and setup
85