Configuring USB ports
To specify USB configuration settings, highlight USB Configuration in the I/O Device
Configuration menu and press Enter. The following screen is displayed:
The details you are prompted to specify are explained in the following table:
Field
Legacy USB
Support
USB – All
Controllers
USB – Host
Controllers 2 and 3
USB – Host
Controller 3
USB2.0 (EHCI)
Controller
Issue G
Explanation
Choose Enabled to include support for Legacy USB.
Choose whether to enable or disable all USB functions.
Choose whether to enable or disable these USB functions.
Choose whether to enable or disable this USB function.
Choose whether to enable or disable USB 2.0 functionality.
PhoenixBIOS features and setup
67
Need help?
Do you have a question about the Apollo and is the answer not in the manual?