Eurotech Apollo User Manual page 58

APOLLO user manual
Specifying boot options
Each time the computer is switched on, a set of checks and procedures are carried out.
You can control some of the events that take place as part of this sequence. For
example, if speed of booting is a primary concern, you can minimize the number of tests
carried out.
To specify boot settings, highlight Boot options in the Main menu and press Enter. The
following screen is displayed:
The following table explains the boot options you can choose:
Field
Boot-time
Diagnostic Screen
Quickboot Mode
Summary screen
Boot with keyboard
58
Explanation
Choose Enabled if you want the diagnostic screen to be
displayed during boot.
Choose Enabled to skip certain tests when booting, in order to
speed up the boot process.
Choose Enabled to display details of the system configuration
during boot. When the summary screen is displayed press the
Pause/Break key to hold the screen for closer inspection, when
complete press the backslash "/" key to continue the boot.
Choose Enabled if you want the Power On Self Test (POST)
routine to check for attached keyboards during boot.
Issue G