Table of Contents
Advertisement
APOLLO user manual
ACPI control settings
You can control ACPI (Advanced Configuration and Power Interface) settings. To do this,
highlight ACPI Control Sub-Menu in the Advanced menu and press Enter. The following
screen is displayed:
The details you are prompted to specify are explained in the following table:
Field
APIC - IO APIC Mode Choose Enabled to set the APIC interrupt mode.
HPET - High
Performance Event
Timer
Base Address
Native IDE Support
78
Explanation
See pages
98
and
125
for further information about the APIC
Advanced Interrupt Controller.
This is only valid in Windows XP and Windows 2000.
You must re-install the operating system if you want to
change to APIC mode.
Choose Enabled to test the High Performance Event Timer (HPET).
This is only valid in Windows XP.
Specify the base address for the HPET.
Select Enabled if you want to include Native IDE support for
Windows XP. If you do this, the NATA package is created.
This setting has no effect in Win98, WinME or
Win2000.
Issue G
Advertisement
Table of Contents
Need help?
Do you have a question about the Apollo and is the answer not in the manual?
Questions and answers