Table of Contents
Advertisement
81
Additional options
Setting up reverberation
Setting up reverberation
The Reverb Time screen is used to change or view your reverberation settings.
The steps below outline how to change the parameters. Please review Table 6-1:
"Reverb time set-up options" for an explanation of parameters
1. From the start screen, select Setup (by using
2. Select Options menu (by using
3. Select Reverb Time (by using
4. In the Reverb Time screen to change the settings, follow below:
•
To change the Method field, press
"Interrupted" or "Impulse" (when Method is selected).
•
To change the Averaging field, press
"Measurement" or "Ensemble" (when Averaging is selected).
•
To change the Threshold, press
"Auto" or a "dB" level value. To change the dB level, press
Arrows to a specific decibel level is selected (i.e., 80 dB) (when
Threshold is selected).
•
To change the Measure field, press
an "RT" value is selected (when Measure is selected). To change,
press
Arrows to a specific decibel level is selected (i.e., 80
dB) (when Threshold is selected).
•
To change the Filters field, press
"1/3" (when Filters is selected).
a
b
c
d
e
Figure 6-3: Reverb Time Setup screen
.
Arrows) & press
Arrows) and press
Arrows) and press
to switch between
to switch between
. Press
to toggle between
to toggle between "Auto" or
to switch between "1/1" or
Reverb Time options
a. Method field
b. Averaging field
c. Threshold field
d. Measure field
e. Filters field
Models SE and DL
.
.
.
Advertisement
Table of Contents
