Chapter 3:Setting Up The Evm; Setting Up Parameters Via The Keypad; Time And Date Setting - 3M EVM Series User Manual

21

Setting up parameters via the keypad

Time and date setting

Setting up the EVM
Chapter 3:
The focus of this chapter is to address all of the setup options available
on the EVM. Once your parameters are selected, you will want to refer
to the Calibration chapter (see Chapter 4).
NOTE: if you are using QSP-II, you may want to program all of

your setting via the software. Please refer to Chapter 6, for QSP-II
details.
Setting up parameters via the keypad
The following user-adjustable setup screens are explained will appear
for all instrument models:





If you ordered the EVM-7 model, a Particulate setup menu and a
PID setup menu will also appear.
Time and date setting
The EVM uses a 24-hour clock (military time) and specifies date by
day, month, and year. The date and time setting are important
elements used as you are analyzing your log data results.
 Changing time and date settings
1. Turn on the EVM by pressing On/Off/Esc

Time and date screen
Battery power check screen
Logging screen includes selecting the logging interval,
averaging time, and logged measurements
Display settings include selecting key clicks, language, and
display contrast
Setting up Input/Output (I/O) options including digital-out, air
velocity, or analog-out
The Start screen will appear (see Figure 3-2 for details).
CHAPTER
3
.