Disabling Secure Run Or Secure Setup (Unlocking); Secure Code Backup Number; Secure/Lock Setup Prompt - 3M SP-SE-2-1/1 User Manual

49 Locking setup or run mode

Disabling secure run or secure setup (unlocking)

4. To set Secure Setup Mode, ensure it is highlighted by pressing Down
Disabling secure run or secure setup (unlocking)
You can disable Setup Mode security only when the session is stopped.
 From Secure Run or Secure Setup screen
1. Both screens will have a Lock softkey (see Figures 4-11 or 4-12).
2. Press the Lock softkey and the code will appear (see Figure 4-10 for
3. Enter in the code (using Up/Down arrows to change value and Enter to
4. Press Enter to exit the code field. Disabled will appear indicating the

Secure code backup number

If you forget your own security code, you can enter "9157" in the template to
disable Secure Run Mode or Setup Mode Security.
 From the Start screen
1. In the Start screen, press the Lock softkey. The Lock screen appears.
2. Follow Steps 2-4 above, "Setting secure run or secure setup", page 47.
arrow. Once selected, press Enter and "0000" will appear. (See Figure
4-10 for a screen example.) (Also, you must be in stop mode.)
To select a numeric code, press Up/Down arrows to select a
•
number, press Enter
Press On/Off/Esc
•
This will Enable the Secure Setup (or locking setup).
Figure 4-12: Secure/lock setup prompt
example).
move to next field).
lock feature is turned-off.
to toggle between the fields.
repeatedly until the Start screen appears.
To unlock/unsecure
Press lock softkey and
then enter in code.
Models SE and DL