Setting The Date; Setting The Time; Setting The Language; Performing A Self Check - 3M Clean-Trace NGi Luminometer User Manual

6.04 Setting the Date
While in the SETUP Menu, use the navigation (▲/▼) buttons to select DATE & TIME and
press the Select button. The DATE & TIME menu can now be seen.
While in the DATE & TIME menu, use the navigation (▲/▼) buttons to select SET DATE.
Day is highlighted only after the Select function button is pressed. Use the navigation (▲/▼)
buttons to change the Day until correct. Press the OK Button.
The Month will now be highlighted on the display. Set the Month using the navigation (▲/▼)
buttons then press OK.
The Year will now be highlighted on the display. Set the Year using the navigation (▲/▼)
buttons then press OK.
Now use the navigation (▲/▼) buttons to select another item in the DATE & TIME menu or
press Back to return to the SETUP menu.
6.05 Setting the Time
While in the SETUP Menu, use the navigation (▲/▼) buttons to select DATE & TIME and
press the Select button. The DATE & TIME menu can now be seen.
While in the DATE & TIME menu, use the navigation (▲/▼) buttons to select SET TIME, press
Select and Hours is highlighted on the display. Use the navigation (▲/▼) buttons to change
the Hour until correct. Press the OK Button.
The Minutes will now be highlighted on the display. Set the Minute using the navigation
(▲/▼) buttons then press OK.
The Seconds will now be highlighted on the display. Set the Second using the navigation
(▲/▼) buttons then press OK.
Use the navigation (▲/▼) buttons to select another item in the DATE & TIME menu or press
Back to return to the SETUP menu.
NOTE: The date & time will automatically be corrected whenever the NGi is Synchronised.
6.06 Setting the Language
Contact your local distributor for a current list of languages available.
While in the SETUP Menu, use the navigation (▲/▼) buttons to select LANGUAGE and press
the Select button.
The LANGUAGE menu can now be seen.
Use the navigation (▲/▼) buttons to select the Language required. Press either of the OK
buttons to return to the SETUP menu.
NOTE: The language changes automatically as navigation (▲/▼) buttons select a
different language.
6.07 Performing a Self Check
Self Check performs both a background reading and a calibration check. Before selecting Self Check, ensure the sample chamber is empty,
the chamber cap is closed and the instrument has been at a stable temperature for at least 15 minutes.
While in the SETUP Menu, use the navigation (▲/▼) buttons to select SELF‑CHECK.
DATE & TIME
Set Date 04-Jan-12
Set Time 14:28:56
Date Format DOW D M Y
Wed 04 Jan 2012 10:09
Back
DATE & TIME
Set Date 04-Jan-12
Set Time 14:28:56
Date Format DOW D M Y
Wed 04 Jan 2012 10:09
Back
SETUP MENU
Date & Time
Language
Self–check
Backlight Timeout
Wed 04 Jan 2012 10:09
Back
Language
English
Francais
Espanol
Portugues
Deutsch
Italiano
Wed 04 Jan 2012 10:09
Back
SETUP MENU
Date & Time
Language
Self–check
Backlight Timeout
Wed 04 Jan 2012 10:09
Back
Select
Select
Select
Select
Select