12
Setup/instrument configuration
Time and date setting
Time and date setting
The Time-Date is used to set-up the current time and date parameters. These settings are used in many of
the charts and graphs in the software and when viewing calibration history and/or time-history measurements
on the instrument.
Setting the Time and Date parameters
1. From the setup screen, select Time-Date by pressing the
2. To change the Time or Date fields, press the
3. Press
4. Press
• Repeat steps 2 through 4 to change Time and/or Date.
5. To exit the screen, press
press
Figure 3-6: Time and Date Setup screen
/
arrows to change the values. To move to the next field press
key to save or escape to abort.
key. (This will return to the previous screen. To return to the start screen,
key a second time.)
/
keys and press
/
key to select and press
Time and Date fields
Day field
It will automatically display based on
the date field.
Sound Examiner SE-400 Series
key.
key.
/
arrows.