43
Setting up auto-run
Timed run setting
Timed run setting
In Timed Run mode, you program the instrument's duration (or timed run)
and then manually start your study, which can be applied as many times as
you wish. The auto-run will end when the duration expires.
Viewing or changing the Timed Run setup
1. From the start screen, press Up/Down
press Enter
2. Select Auto-Run by using Up/Down
Enter
3. In the Auto-Run screen, repeatedly press Enter
appears.
4. To set the duration, press Enter
Minutes, and Seconds field. To change the time values, press
Up/Down
5. Press On/Off/Esc
are ready to run your study, press Run/Pause
.
to select.
repeatedly until the specified value is selected.
repeatedly to return to the start screen. When you
Figure 4-6: Timed Run setup screen
to highlight Setup and
to highlight and press
until Timed-Run
to toggle between the Hours,
.
Timed-Run
Auto-run setting with timed
run selected
Duration
Formatted as
Hours:Minutes:Seconds
Models SE and DL