117
File directories
Session directory
Navigating in a session/config. directory
Press any arrow key to move around in the directory. If there are multiple files,
press the More softkey to navigate to additional screens. Press On/Off/Esc
key to return to previous screen(s).
Naming and renaming files
There are common procedures that you can use to name and rename files,
including a lookup capability that allows you to determine if a filename is already
in use.
You cannot rename a session file unless it is in the instrument's memory.
Accordingly, you can rename the closed session currently residing in memory,
but you must first load a past session file before you can rename it.
NOTE: For past sessions, please follow these steps but first load the file.
Renaming the session in memory
1.
2. Press
3. In the File Name screen, press
•
Softkeys may be used
to quickly select a
letter/number
character.
•
Or repeatedly press
Up/Down Arrows to
select appropriate
character.
4. Take the following actions to change the underlined character:
In the Start screen, press the File softkey. The File screen appears.
to select Re-name Last Session File, then press
The session file renaming screen appears.
The highlighted cursor moves to the field of one of the four softkeys,
•
depending upon the last character in the existing filename.
The last character in the filename is underlined.
•
Figure 7-9: Naming a file in the Data File screen
•
Press
to move sequentially until the appropriate character is selected.
The underlined character in the name changes as you press the keys.
(Optional Shortcut): Press a softkey to select a different character set.
•
and the following changes will occur:
.
•
Press Enter to add
another field.
•
Press Up/Down arrows
to change character
Models SE and DL