Selecting Measurement Type For Curves; Figure 6-16: Audiometric Booth Setup In The Curves Screen - 3M SP-SE-2-1/1 User Manual

95 Audiometric background curves
Setting up audiometric background curves
2.
3. Select the following recommended meter 1 settings using the softkeys
4. Press On/Off/Esc
5. Select Setup (use up/down arrows to highlight) and press Enter
6. Select Options menu (use up/down arrows to highlight) and press Enter
7. Select Curves menu (use up/down arrows to highlight) and press Enter
8. For the Mode field, select Eval ("Evaluation") by repeatedly pressing
9. For the Type field, select one of the following by pressing the down arrow to
Next, select the measurement settings, by selecting View Session (use
Up/Down Arrow to select) and press Enter
using the softkeys: measurement to Leq, Slow response, and Z-
weighting.
•
Setting measurement to Leq:
"Lookup" menu. Using up/down arrows on the keypad, select "L_eq". A
diamond character u indicates the "selected" measurement.
•
Setting timed response:
appropriate setting (recommended is "S" for slow response.) An underline
denotes the "selected" response.
Setting Weighting: Repeatedly press 3
•
setting (recommended is "Z" for Z-weighting).
Figure 6-15: Selecting measurement type for curves
Enter .
move to the type field and repeatedly press Enter
ANSI AM Booth or OSHA AM Booth
•

Figure 6-16: Audiometric booth setup in the curves screen

Press the 1
Repeatedly press 2
Lookup menu
Timed Response
Weighting
to return to the start screen.
.
st
softkey to access the
nd
softkey to select
rd
softkey to select appropriate
.
Curves screen
Mode – select Eval
Type – ANSI Booth
Criterion - field will only
appear if ANSI AM Booth
is selected in type field
Models SE and DL
.
.
.