Secure/Lock Screen - 3M SP-SE-2-1/1 User Manual

47 Locking setup or run mode
Setting secure run or secure setup (locking)
 Setting secure run or secure setup (locking)
1. From the start screen, press the Lock softkey.
2. In the Lock screen, there are two selectable fields:
Figure 4-8: Secure/Lock option
Secure Run Mode with a status line
•
Secure Setup Mode with a status line.
•
Each Status Line is used to specify either a "disabled" state or an
•
enabled state when a code is entered to assign an unlock code.
Figure 4-9: Secure/Lock screen
Lock:
th
Press 4 softkey to
select "Lock" screen
Setting Lock feature:
•
Enable or Disable "Secure Run Mode"
•
Enable or Disable "Secure Setup Mode"
Models SE and DL