Loading And Deleting Files - 3M SP-SE-2-1/1 User Manual

115
File directories

Loading and deleting files

6. A bar chart or a filtered bar chart may appear (depending on your
7. Press Stop key to exit Review Mode. (The Pause icon will disappear leaving
Loading and deleting files
As you are working with loading past files and possibly deleting files which have
been imported into QSP-II, it is important to note that the delete operations take
place as soon as you press the respective softkey. While you can re-load a file,
you cannot un-delete a file, so be careful. (Loading and deleting files is
accessed via the File softkey\Session Directory menu.)
 Loading or deleting a file
1. From the start screen, press the File softkey.
2. In the File menu, ensure Session Directory is highlighted (if it is not,
3. To load a file, press
measurement setting). Press Enter
screens.
Figure 7-6: Viewing past data example
only the Stop indicator displayed on your screen.)
press until it is selected.) Press
softkey (see "b") or press
to view various measurement
Review mode indicator
Bar chart (SLM mode) results
File path – indicates the name of
session/study, the analysis type
(SLM, 1/1, 1/3)
key.
to select the appropriate file and press Load
key (skip this step if you are deleting a file).
Models SE and DL