32
Logging
Setting logging options
Setting logging options
To set logging only options (Average, Peak, Maximum, Minimum)
Enabling or disabling logging options
1. Ensure you are at the start screen.
2. Press Up/Down
3. Select Logging by pressing Up/Down
4. To change the Logging options for Meter 1 do the following:
Logging options
On/Off setting
•
AVG (average)
•
Peak
•
MAX (maximum)
•
MIN (minimum)
5. To change the Exceedance Levels on Meter 1, press Up/Down
If turned on, repeatedly press On/Off/Esc
•
start screen (see Figure 3-3 above).
To turn on, press and hold On/Off/Esc
•
appears.
.
Enter
a.
Press Up/Down
b.
Once the measurement is selected, press Enter
toggle between "On" or "Off". Press right/left arrow to move back
to logging field.
NOTE: If you are setting Meter 2 options, ensure you are on Meter 2 by
pressing the Meter 1/Meter 2 softkey, and then repeat step 4a-b.
Figure 3-8: Logging screen explained
select either L1 or L2
to highlight Setup and then press Enter
to highlight either AVG, PEAK, MAX, MIN.
until you return to the
until the start screen
to highlight and then press
button to
Exceedance options
Set % by using the up/down
arrows.
•
L1
•
L5
Filters
•
On/Off setting
Logging Interval
•
Logging rate which can
be set at various
minutes and second
values
Softkey: Meter 1/Meter 2
Models SE and DL
.
to