Setting Date Format; Setting The Time Format; Setting The Date - 3M Clean-Trace NGi Luminometer User Manual

6.03 Setting Date Format

While in the SETUP Menu, use the navigation (
select DATE & TIME and press the Select button. The DATE &
TIME menu can now be seen.
The choice of date formats are:
DD MM YY e.g.
MM DD YY e.g.
YY MM DD e.g.
Date e.g.
Date, M e.g.
Date, M, Y e.g.
Use the navigation ( /
▲
press the Change button repeatedly until the required format is
shown.
Press the Back button to return to the SETUP menu or use the
navigation ( / ) buttons to select another item in the DATE &
▲ ▼
TIME menu.

6.04 Setting the Time Format

While in the DATE & TIME menu, use the navigation (
buttons to select TIME FORMAT. Pressing the Change button
repeatedly will cycle the time format between 12 / 24 hour clock.
When correct, press the Back button to return to the SETUP
menu or use the navigation (
in the DATE & TIME menu.

6.05 Setting the Date

While in the DATE & TIME menu, use the navigation (
buttons to select SET DATE 'Day' is highlighted only after the
Select function button is pressed. Use the navigation (
buttons to change the 'Day' until correct. Press the OK Button.
The 'Month' will now be highlighted on the display. Set the 'Month'
using the navigation (
▲
The 'Year' will now be highlighted on the display. Set the 'Year' using the navigation (
Now use the navigation (
to the SETUP menu.
23-01-03
01-23-03
03-01-23
Thu 23rd
Thu 23rd Jan
Thu 23rd Jan '03
) buttons to select DATE FORMAT and
▼
/ ) buttons to select another item
▲ ▼
/ ) buttons then press OK.
▼
/ ) buttons to select another item in the DATE & TIME menu or press Back to return
▲ ▼
/ ) buttons to
▲ ▼
/ )
▲ ▼
/ )
▲ ▼
/ )
▲ ▼
/ ) buttons then press OK.
▲ ▼