Hash Method; Hash Values; Lba - Logicube Falcon-NEO User Manual

Logicube Falcon -Neo User's Manual
®

5.2.3.1.1 Hash Method

Select one of the following hash methods:
SHA-1 – Select this to hash or verify the
•
Target drives using the SHA-1 algorithm.
SHA-256 – Select this to hash or verify
•
the Target drives using the SHA-256
algorithm.
MD5 – Select this to verify the Target
•
drives using the MD5 algorithm.

5.2.3.1.2 Hash Values

By default, this value will have 0s (zeros). If this is
not changed, or no value is entered, this will
instruct the Falcon-NEO to hash the drive using
the selected algorithm in the previous step. If a
value is entered, the Falcon-NEO will hash the
selected drive and verify hash with the value
entered/edited.
To set the expected value, tap the
icon. The on-screen keyboard will appear, and
the expected hash value can be set.

5.2.3.1.3 LBA

The LBA icon will bring up the LBA settings
screen. The user can adjust the percentage or
the number of blocks of the drive to hash and
where to start the hash. By default, the length is
set to 100% (whole drive) and the starting
percentage is set to 0% (start of the drive).
When the Falcon-NEO finishes hashing the drive,
the following screen will appear showing the
task completed.
TYPES OF OPERATIONS
(edit)
55