Drive Spanning - Logicube Falcon-NEO User Manual

3.1.6 Drive Spanning

The Falcon-NEO can automatically span to two (or more) Destination drives when
using Drive to File, File to File, Partition to File, or Net Traffic to File mode
(DD, E01, EX01, or DMG). When the task is started, and there may not be enough
space on the Destination drive, the following prompt will appear warning that
there might not be sufficient space on the Destination drive:
When the Destination drive is full and the remaining data to be will not fit,
Falcon-NEO will prompt for another drive.
When the screen above appears, tap the OK icon and the Select Repository
screen will appear. The Destination drive that is full can be disconnected, and
replaced with another drive, or a different Destination drive port or repository can
be selected. After selecting the next Destination/Repository to be used, tap the
OK icon.
Logicube Falcon -Neo User's Manual
®
When the imaging operation is finished, all subsequent
Destinations/Repositories used will contain the same
Case/File name and the next DD, E01, EX01, or DMG file. For
example, if the last file on the first Destination used is *.E23,
the next Destination/Repository used will start with file *.E24.
QUICK START
21