Iscsi - Logicube Falcon-NEO User Manual

Tap Role and input the role for this repository. Tap OK when finished.
To delete a repository, tap the delete icon. A confirmation screen will appear. Tap
Yes to permanently delete the repository from the list.

5.9.2 iSCSI

This screen allows a user to add a repository using the iSCSI protocol.
To add a repository using the iSCSI protocol, an iSCSI Target must be setup on
the remote system. Since networks are configured differently, a Systems
Administrator or Network Administrator may be needed to set up the iSCSI
protocol.
Once the iSCSI Target has been setup, click Settings.
Logicube Falcon -Neo User's Manual
®
For the Path, make sure the forward slash ( / )
is used and not the backslash symbol ( \ ).
In order for a repository to remain configured when the Falcon-
NEO is turned off, the changes must be saved and loaded to a
profile. Details on profiles can be found in
TYPES OF OPERATIONS
Section 5.10.1.
75