Add/Remove - Logicube Falcon-NEO User Manual

Domain – If the shared resource is in a domain. If not, use the workgroup name.
•
Username – The username with full permissions to the shared resource (read and write
•
access).
Password – The password for the username.
•
The following information is required to set up an iSCSI repository:
Portal – The IP address or host name of the iSCSI Target.
•
Username – The username with full permissions to the shared resource (read and write
•
access).
Password – The password for the username.
•
Please consult your Network or Systems Administrator to
ensure the above requirements are available or set up properly.

5.9.1 Add/Remove

A list of repositories will be shown. The user has the option of adding or deleting
a repository. This will include all drives attached to the Falcon-NEO (Destination
ports) and any networked repository.
Tap Add Repository to add a repository. The Add Repository window will appear.
Logicube Falcon -Neo User's Manual
®
If a repository location shows (NOT MOUNTED), it is because
the drive attached is not formatted by the Falcon-NEO or the
Falcon-NEO cannot connect to the shared network resource.
TYPES OF OPERATIONS
73