Iscsi - Logicube Falcon-NEO User Manual

See Section 10.1 for details on how to view Source or Destination drives over the network using
SMB.
Some advantages of using this method are:
The contents of the drive are searchable using the Operating System's search functions.
•
Third party analysis tools and software can be used with the logical partition.
•

6.4 iSCSI

Another way to access Source drives from a computer (through a direct network cable connection
or through a network) is through the iSCSI protocol. This method allows both physical and logical
access to the drives but may require additional software installed and configured on the
computer. To use the iSCSI protocol, an iSCSI initiator must be installed and configured to view
the contents of drives connected to the Falcon-NEO over a network.
Like using SMB, some advantages of using this method are:
The contents of the drive are searchable using the Operating System's search functions.
•
Third party analysis tools and software can be used with the logical partition.
•
See Section 10.2 for details on how to view Source drives over the network using iSCSI.
Logicube Falcon -Neo User's Manual
®
PREVIEWING DRIVES
93