Viewing Source Drives Over The Network Using Iscsi; Configuring The Iscsi Initiator - Logicube Falcon-NEO User Manual

6.

10.2 Viewing Source drives over the network using iSCSI

An iSCSI initiator must be configured to view the contents of Source drives over a network.
Although there are many iSCSI initiators available, these next sections will discuss configuring
Microsoft's iSCSI initiator in Windows.
Using an iSCSI initiator may require additional
assistance from your IT administrator.

10.2.1 Configuring the iSCSI initiator

1.
Logicube Falcon -Neo User's Manual
®
The contents of the drive will be shown.
Open the iSCSI initiator. In the Target tab, enter the Falcon-NEO's host
name or IP address in the Target field. Click the Quick Connect button
to continue.
VIEWING DRIVES
115