Task Macro; Tasks - Logicube Falcon-NEO User Manual

will only show drives connected to the Destination ports or repositories set up
through the Manage Repositories screen.

5.5 Task Macro

This operation allows up to five (5) macros that can be set. Each macro can
run up to nine (9) tasks sequentially (one after another). For example, a macro
can be set to perform these tasks in order: Wipe, image, hash, push, then
wipe again.
Each of the five macros can be set by tapping on the Macro number as seen in the next picture:
Each task or operation must be set up before setting up the macro. For example, to set up a
Task Macro that will perform a wipe, then image, users must first set up both the wipe and
image tasks. Once the wipe (for example, Wipe 1) and image (for example, Image 1) has been
set up, the Task Macro can be set.

5.5.1 Tasks

Tapping this icon allows the user to set specific tasks for each macro. The
following window will appear:
Logicube Falcon -Neo User's Manual
®
TYPES OF OPERATIONS
64