Setting Key Passwords - Logicube Falcon-NEO User Manual

•
•
•
•
•
•
Logicube Falcon -Neo User's Manual
®
Key: Log File Deletion – A password can be set as an extra layer of
protection when deleting log files. If this password is set, Falcon-NEO will
prompt for the password before any log files can be deleted.
Key: Local HTTP – A password can be set to lock the local touch screen
on the Falcon-NEO. If this password is set, the Falcon-NEO will prompt
for a password before allowing access to the local touch screen.
Key: Remote HTTP – A password can be set to lock remote HTTP access
(through a web browser). If this password is set, the Falcon-NEO will
prompt for a password before allowing access through a web browser.
Key: Config Lock – The Falcon-NEO can be configured to lock out any
configuration changes. When this is enabled, changes to the different
types of operations cannot be made without entering the correct key or
password. Different types of operations can still be started.
For example, when the Falcon-NEO is locked, and it is configured for
Drive to File Imaging mode, the user will be unable to change this mode
to Drive to Drive but can start the Drive to File task.
User Account: LOGICUBE – Allows the user to change the logicube local
account.
User Account: IT – Allows the user to change the it local account.

5.10.2.1 Setting Key Passwords

To set a key for Log File Deletion, Local HTTP, Remote HTTP,
or Config Lock, tap one of the buttons. The following screen will
appear.
Tap the Enable icon to enter a password or key. The available
characters are 0 through 9 and A through F.
The Auto Lock button is available for the following keys:
Local HTTP
•
Remote HTTP
•
Config Lock
•
TYPES OF OPERATIONS
79