Logicube Falcon-NEO User Manual page 112

2.
3.
4.
Logicube Falcon -Neo User's Manual
®
Select the encrypted disk to mount (in this example, it is Disk #1). Place a
check mark on the Entire disk option. FreeOTFE cannot read the
partition table on the drive since it is encrypted at this time.
In the Key tab, enter the Key (password) and make sure the Hash is set to
RIPEMD-160.
In the Encryption tab, set the Cipher to AES (256 bit CBC). Set the
Initialization Vector (IV) generation method to match what was used
in the IV Generation on the Falcon-NEO. In this example, "plain64' was
used. In the 'Sector zero location', choose Start of encrypted data.
DRIVE ENCRYPTION & DECRYPTION
103