13: Usb Boot Client; Usb Boot Client Introduction; Requirements; Creating The Usb Boot Client - Logicube Falcon-NEO User Manual

13.0 USB Boot Client Introduction

A USB Boot Client (bootable USB flash drive) is available. The USB Boot Client allows the imaging
of a Source drive from a computer on the same network without booting the native Operating
System on the computer and can be imaged without having to remove the drive from the
computer.

13.1 Requirements

Your own 1 GB or larger capacity USB flash drive
•
A computer with Microsoft Windows
•

13.2 Creating the USB Boot Client

Here are the steps to create the USB Boot Client with the software necessary to be bootable, and
when used to boot a computer, will allow the Falcon-NEO to use the computer's drive as a Source
drive.
For steps 1 and 2 of this section, please use Chrome or Firefox to download
the files. Internet Explorer and Edge do download *.img files properly.
1. Using an Internet browser, browse to http://updates.logicube.com/iscsi/. Look for the
following two files:
Win32DiskImager-1.0.0-binary.zip
•
The USB Boot Client image file – A file with a *.img file extension
•
2. Download both files. If the image file will not download, right-click on the link and use the
'Save Target As...' or 'Save Link As' option and make sure it is saved with the *.img file
extension.
3. Extract all the files within the win32diskimager-v1.0.0-binary.zip file to a folder or
directory of your choosing.
4. Connect your USB flash drive that is at least 1 GB in capacity to the computer where the
software was downloaded. It is recommended that all other USB drives are unplugged.
The contents of the USB flash drive will be overwritten. If there is data
on the USB flash drive that should not be deleted, back up the contents
of the USB flash drive or use another USB flash drive for this procedure.
Logicube Falcon -NEO User's Manual
®

13: USB Boot Client

123