Source; Settings; Destination - Logicube Falcon-NEO User Manual

There are three selections when performing a push:

Source

•

Settings

•

Destination

•
To push files to a network location, a network repository must be set
up. Details on how to add a repository can be found in
5.4.1 Source
Tap this icon to select the drive or repository where the files are to be pushed
from (where the files to push are located).
After selecting the Source, a list of cases found on the drive will be displayed.
Select one or more cases to push then tap the OK button to continue. If no cases
are selected, all cases found on the drive or repository will be pushed.
5.4.2 Settings
(Optional) Tap this icon to enter case info and to set the verify option. There are
two verify settings available:
•
•
5.4.3 Destination
Tap this icon to select the drive or repository where the DD, E01, EX01, or DMG
images will be pushed to (where the files to push will be pushed/copied to). This
Logicube Falcon -Neo User's Manual
®
Yes – Each file that was copied (on the Destination location) will be
verified using the selected hash method/algorithm selected.
No – No verification will be made.
TYPES OF OPERATIONS
Section 5.9.1.
63