Passes - Logicube Falcon-NEO User Manual

Logicube Falcon -Neo User's Manual
®
entire drive (100%). The LBA count can be
adjusted by tapping the edit icon.

5.3.2.2.4 PASSES

This Wipe Setting will change depending on the
Wipe Pattern Mode selected.
If None was selected, this is not
•
selectable.
If DoD was selected, all 7 passes will be
•
pre-filled. Users can edit the pass values
by tapping the edit icon. The default
values are: 00, 01, 00, FF, F6, 00, XX
(random).
If Custom was selected, one pass will be
•
pre-filled with a random value. Users can
edit the pass values if desired by
tapping the edit icon. The default value
for a custom pass is 00.
Editing one or more of the passes in DOD or
CUSTOM mode will bring up this screen:
SKIP – Instructs the Falcon-NEO to skip
•
the pass.
RANDOM – Writes one random
•
hexadecimal value (from 00 - FF) to all
the selected Logical Block Addresses.
RAND. BUFFER – The Falcon-NEO will
•
create an 8MB block filled with random
values (each byte in the 8MB block will
contain a random value). The 8MB block
will be written repeatedly to fill the
entire drive.
TYPES OF OPERATIONS
60