Imaging To Or From A Network; Parallel Imaging - Logicube Falcon-NEO User Manual

7.

3.1.4 Imaging to or from a network

A network repository or location must be set for the Falcon-NEO to be able to
image to or from a network repository/location.

3.1.5 Parallel Imaging

Falcon-NEO can perform Parallel Imaging. A user can simultaneously perform
multiple imaging tasks from the same source drive to multiple destinations using
different imaging formats. For example, image to a network location or a
destination drive using the E01 format while imaging to a different destination
drive using native/mirror or DD format.
For parallel imaging, prior to starting the imaging first task, users must set all
other imaging tasks that need to be run in parallel.
When a task is started, and the same Source drive is selected on other imaging
tasks, a screen will appear notifying the user that there are tasks that may be
started in parallel. The user can then select one or more of the tasks to run.
Logicube Falcon -Neo User's Manual
®
A progress bar will appear at the bottom of the screen showing the bytes
processed, number of packets, segments, and dropped packets.
For details on how to add a network repository/location,
please see Section 5.9 of this manual.
QUICK START
20