5.17.4 Configuring HDD Group
You can configure the HDD group to save the specified main stream, sub stream and
snapshots to the designated HDD group.
If "Current HDD Mode is Quota Mode" is shown on the interface, you need to switch to
HDD mode.
You can enable either HDD Mode or Quota Mode at one time. The system reboots to
activate the settings.
Select Main Menu > STORAGE > ADVANCE.
The ADVANCE interface is displayed. See Figure 5-205.
Select the group for each HDD group, and then click Save to save the settings.
After configuring HDD group, under the Main Stream tab, Sub Stream tab and
Snapshot tab, configure settings to save the main stream, sub stream and snapshot to
different HDD group as selected by you. See Figure 5-206, Figure 5-207, and Figure
5-208.
Local Configurations 223