Table of Contents
Advertisement
Configure the settings for the main/sub streams parameters. See Table 5-23.
Parameter
Description
In the Channel list, select the channel that you want to configure the
Channel
settings for.
Enable the smart codec function. This function can reduce the video
Smart Codec
bit stream for non-important recorded video to maximize the storage
space.
Type
In the Compression list, select the encode mode.
Compression
In the Resolution list, select resolution for the video.
Resolution
The maximum video resolution might be different dependent on your
device model.
Main Stream: In the Type list, select General, MD (Motion
Detect), or Alarm.
Sub Stream: This setting is not configurable.
H.265: Main profile encoding.
H.264H: High profile encoding. Low bit stream with high
definition. This setting is recommended.
H.264: General profile encoding.
H.264B: Baseline profile encoding. This setting requires higher bit
stream compared with other settings for the same definition.
Local Configurations 84
Advertisement
Table of Contents
