Configure the parameters settings. See Table 5-51.
Parameter
Description
Access Point
Indicates the channel that the camera is connected to.
Display Type
In the Display Type list, select List or Graph.
Select the information type that you want to search. You can select
Type
Humidity or Temperature.
Select the information state that you want to search.
Status
This option is available when you select List in the Display Type
list.
Start Time
Enter the start time and end time for the information that you want
End Time
to search.
Click Search. The system starts search according to your parameters settings.
After searching is finished, the result displays.
For the data displayed in list, see Figure 5-160.
Click Go To to switch result pages.
Local Configurations 180