Table of Contents
Advertisement
Parameter
Enable
Host IP
Port
Anonymity
User Name
Password
Remote Directory
File Length(M)
Image Upload Interval
(Sec.)
Channel
Week Day
Period 1, Period 2
Record type
Click Test.
The system pops up a message to indicate success or failure. If failed, please check
the network connection or configurations.
Click Apply to complete the settings.
Description
Enable the FTP upload function.
IP address of the PC that is installed with FTP server.
The default is 21.
Enter the user name and password to login the FTP server.
Enable the anonymity function, and then you can login
anonymously without entering the user name and password.
Create folder on FTP server.
If you do not enter the name of remote directory, system
automatically creates the folders according to the IP and
time.
If you enter the name of remote directory, the system creates
the folder with the entered name under the FTP root
directory first, and then automatically creates the folders
according to the IP and time.
Enter the length of the uploaded recorded video.
If the entered length is less than the recorded video length,
only a section of the recorded video can be uploaded.
If the entered length is more than the recorded video length,
the whole recorded video can be uploaded.
If the entered length is 0, the whole recorded video will be
uploaded.
If this interval is longer than snapshot interval, the system
takes the recent snapshot to upload. For example, the
interval is 5 seconds, and snapshot interval is 2 seconds per
snapshot, the system uploads the recent snapshot every 5
seconds.
If this interval is shorter than snapshot interval, the system
uploads the snapshot per the snapshot interval. For
example, the interval is 5 seconds, and snapshot interval is
10 seconds per snapshot, the system uploads the snapshot
every 10 seconds.
To configure the snapshot interval, select Main Menu >
CAMERA > ENCODE > Snapshot.
Select the channel that you want to apply the FTP settings.
Select the week day and set the time period that you want to
upload the recorded files. You can set two periods for each week
day.
Select the record type (Alarm, Intel, MD, and General) that you
want to upload. The selected record type will be uploaded during
the configured time period.
Local Configurations 234
Advertisement
Table of Contents
