Table of Contents
Advertisement
On the Expanded PTZ Control Panel, click
The MENU OPERATION interface is displayed. See Figure 5-57.
Click Enter.
The OSD menu is displayed. See Figure 5-58.
On the MENU OPERATION interface, click the arrow button to select the onscreen
parameters.
Click Enter to complete the settings.
Configuring Camera Settings
5.5
5.5.1 Configuring Image Settings
You can configure the image settings such as saturation, contrast, brightness, sharpness for
each connected camera.
Select Main Menu > CAMERA > IMAGE.
The IMAGE interface is displayed. See Figure 5-59 for analog channel and Figure 5-60
for digital channel.
.
Local Configurations 80
Advertisement
Table of Contents
