Configuring Remote Devices; Adding Remote Devices - Dahua Smart 1U User Manual

Click Browse.
The Browse interface is displayed.
Select the upgrade file and click OK.
The COAXIAL UPGRADE interface is displayed.
You need to insert the USB storage device that contains the upgrading files.
Select the check box of the channel that you want to upgrade.
Click Start Upgrade.
If the upgrading is successful, the system pops up a message indicating the upgrading
is completed. If the upgrading is failed, please check if the Device

Configuring Remote Devices

5.6

5.6.1 Adding Remote Devices

This function is available after you have configured the channel type as IP channel as
described in previous section, see "5.5.6 Configuring Channel Type."
You can add remote devices by adding the IP address.
Select Main Menu > CAMERA > REGISTRATION > Registration, the Registration interface
is displayed. See Figure 5-67.
Local Configurations 90